|Home||» Products||» Paper Chemicals||» Liquid Optical Brightener|
Liquid Optical Brightener
- Minimum Order Quantity
- Unit of Measure
Our consistent efforts and dedication enable us to carve a niche as a most trustworthy organization engaged in offering Liquid Optical Brightener For Paper. It is a good optical brightener for paper and gives optimum results on all kinds of sized papers. We process this liquid under the firm guidance of expert supervisors using high quality compounds. Liquid Optical Brightener For Paper has very good stability to hard water, acid and alkali. We offer this liquid at pocket friendly prices.
- Has excellent build up property
- Good fastness
- Excellent stability
EUROPAL 2BF LIQUID
OPTICAL BRIGHTENING AGENT FOR PAPER AND GIVES OPTIMUM RESULTS
Good Optical Whitener for Paper and gives optimum results on unsized or sized papers where the pH is above 5.5.
Light to dark straw coloured liquid.
Stilbene sulphonic acid derivative (Tetra Sulfonic)
Medium to High
Brilliant bluish white
6 to 12
1.18 to 1.20
IN THE MASS
Europal 2BF Liq. should be added where the stock is vigorously agitated. It can be added directly in the mixing chest where the pH is around 5.5 to get best results. Generally 0.2 - 0.3%. Europal 2BF Liq. of dry pulp is adequate. In special cases 0.6%. Europal 2BF Liq. of dry pulp will be advantageous.
IN SIZE COATINGS: The amount required is generally 1.0 - 5 gm/ltr. Europal 2BF Liq. To improve the printing properties of printing and writing paper size solution (reduced starches, CMC etc.) are often applied to the surface on the size press of some other device which may or may not be part of the paper machine. Maximum whiteness is obtained at 7gm/ltr Europal 2BF Liq. (starch base) depending on the prevailing condition and the degree of whiteness.
IN PIGMENTED COATING SLURRIES: Europal 2BF Liq. is particularly suitable for pigmented coating slurries with a starch/latex base due to it's high affinity for the normal range of binders. The quantities required depend on the basic whiteness of the white pigments and binders, the machine speed, the thickness of coating and white effect required. To obtain the maximum white effect the pH of the coating should be kept slightly alkaline (pH 8-9) with concentrated ammonia. The recommended quality is generally 0.5 - 5gm/ltr. depending upon the make up of the coating slurry.
- Use of the cationic auxiliaries is not desirable as these may get precipitated with the anionic optical brighting agent
- Use of chelating agents such as E.D.T.A. (0.2 gm/ltr) is suggested to prevent interference due to heavy metal ions such as Copper, Iron, Zinc and Magnesium.
- Payment Terms
- Cash in Advance (CID), Cheque, Others
- Supply Ability
- 150 Ton Per Month Per Month
- Delivery Time
- 10 Days
- Sample Available
- Sample Policy
- Free samples are available
- Packaging Details
- As per customer requirement.
- Main Export Market(s)
- Main Domestic Market
- All India